'Votre partenaire pour les produits d'étanchéité, les adhésifs et les revêtements'

PRINCIPALES ACTUALITÉS

Nouveaux produits de Dekalin!
Dekalin a introduit deux nouveaux produits au Caravan Salon de cette année: Dekaphon Pro-Wax est un cire anti-corrosio ...

Distributeurs voulaient!
Nous sommes à la recherche d'un distributeur pro-actif en France et en Finlande pour notre marque Dekalin. Pour plus d'informations o ...

Trousse de réparation
Décaline propose désormais les premiers soins à bord de votre caravane ou camping-car! Pour les petites réparat ...

Nouvelles vidéos de produits disponibles
Nous avons téléchargé nos nouvelles vidéos de produit décaline sur YouTube. S'il vous plaît cliquer ...

SUIVEZ-NOUS SUR

  • Applications

    • What are Orthopedics?

      Orthopedics are medical instruments which deal with the prevention or correction of disorders of bones and associated muscles and joints, like shoes, protheses etc.

    • What are Recreational Vehicles?

      Recreational vehicles are vehicles like caravans and campers, vehicles with living space, a shower and a kitchen. This term and its acronym, RV, are mainly used in North America.

    • What are Shrink Caps and where are they applied?

      Shrink caps are caps are made out of shrink foils, which shrink when external heat is applied. They are used for sealing the top of e.g. wine bottles.

    • What is a Sandwich Panel?

      Sandwich panels are a special class of composites made out of 2 thin outside layers with a high stiffness, with a thick strucutred core made out of a material with low stiffness. This composite-material has an overall low denisity exhbits high bending stiffness.

    • What is ABS and where is it used?

      ABS is the acronym for Acrylonitrile-Butadiene-Styrene, which is a common thermoplastic used to make light, rigid, molded products such as piping (for example plastic pressure pipe systems), musical instruments (most notably recorders and plastic clarinets), golf club heads (used for its good shock absorbance), automotive body parts, wheel covers, enclosures, protective head gear and many more. 

    • What is an Underbody Coating?

      Underbody coatings are specially developed coatings for a sustainable anti-rust and/or stone-chip-protection among the underbody, baseplate and wheelarches of the bodywork of vehicles, e.g. cars, trailers, busses, caravans.

    • What is meant with Thermal Insulation Materials?

      Thermal Insulation Materials are materials with a high resistance to heat transfer, when placed in walls, ceiling, or floors of a structure, these materials reduce the rate of heat flow through the substrate.

    • What is PET and where is it used?

      PET stands for Poly-Ethylene Terephthalate, which is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber.

  • Chemistry

    • What are Water Based products?

      Water based products are products which utilize water as solvent. So when the products are applied, they only emit evaporating water. As a result of international regulations, more and more organic solvents are substituted for water when possible.

    • What is a Chemical Bond?

      A chemical bond is the force holding atoms together in a combined state. This force may result from the attraction of opposite charges (ionic bond), the magnetic and electrical attraction of shared electrons (covalent bond), or a combination of these attractions.

    • What is a Covalent Bond?

      A covalent bond is a type of chemical bond where two atoms are connected to each other by sharing two or more electrons to form a bond.

    • What is a Cross Link?

      Cross Links are bonds that link one polymer chain to another. They can be covalent bonds or ionic bonds. "Polymer chains" can refer to synthetic polymers or natural polymers. See also Polymers Chains.

    • What is a hydrogen bond?

      A hydrogen bond is the attractive force between one electronegative atom and a hydrogen covalently bonded to another electronegative atom.

    • What is a Mechanical Bond?

      A mechanical bond is a bond established between several parts based on structural design without adhesives.

    • What is a Physical Bond?

      A physical bond is a bond that joins basic load-bearing parts of an assembly.

    • What is a solvent?

      A solvent is a liquid or gas that dissolves a solid, liquid, or gaseous solute, resulting in a solution. Solvents are widely used throughout the adhesive and coating industries. Nowadays more and more research is performed to find solutions to exlude harmfull solvents.

    • What is a Thermoharder?

      A Thermoharder is a polymer that turns irreversibly into a solid when heated.

    • What is a Thermoplast?

      A Thermoplast is a polymer that turns into a liquid when heated and freezes to a very glassy state when cooled sufficiently.

    • What is a Thermosetting Plastic?

      Thermosetting Plastics are polymer materials that irreversibly cure to a stronger form, see curing.

    • What is an Aerosol?

      An Aerosol is a suspension of fine solid particles or liquid droplets in a gas; the term aerosol is used for sprays.

    • What is an Aromatic Compound?

      Aromatic Compounds exhibit aromatic properties. Aromaticity is a chemical property in which a conjugated ring of unsaturated bonds, lone pairs, or empty orbitals exhibit a stabilization stronger than would be expected by the stabilization of conjugation alone. It can also be considered a manifestation of cyclic delocalization and of resonance. Well known aromatic compounds are benzene, toluene and xylenes.

    • What is an Elastomer?

      Elastomers are materials that behave like rubber but, made from synthetic polymers and elastomers are superior to rubber in several mechanical or chemical properties.

    • What is an Ionic Bond?

      An ionic bond is a chemical type of bond where two atoms or molecules are connected to each other by electrostatic attraction in which one is positively and the other negatively charged.

    • What is an Organic Component?

      Organic Components are components built up out of hydrocarbon-molecules with different substituents.

    • What is Corrosion?

      Corrosion is degradation of fundamental properties of a substance as a result of chemical reactions with its surroundings. Commonly corrosion occurs with metals, then its a loss electrons due to reaction with water, oxygen and electricity.

    • What is Curing?

      Curing is a term in polymer chemistry and process engineering that refers to the toughening or hardening of a polymer material by cross-linking of polymer chains, brought about by chemical additives, ultraviolet radiation, electron beam or heat. In rubber, the curing process is also called vulcanization.

    • What is Elasticity?

      Elasticity is the tendency of a body to return to its original shape after it has been stretched or compressed. Lots of Dekalin Products exhibit elastic properties in their final state. See also curing and visco-elasticity.

    • What is meant with a Catalyst and what does it?

      A Catalyst is a substance that initiates or accelerates a chemical reaction without being consumed. In time a catalyst loses its activity as a result of poisoning, which means inhibition of the active catalytic sites.

    • What is meant with Ageing?

      Ageing is the accumulation of changes in mechanical and/or chemical properties of an adhesive, sealant, coating or object over time. Some products are very stable over time, but others show significant 'ageing'.

    • What is meant with High Initial Adhesion?

      High Initial Adhesion means the formed bonding can bear relatively much external forces, shortly after it has been applied to the substrates.

    • What is meant with Rheology?

      Rheology is known as the science of studying rheological properties of materials, that is the quantitative and qualitative relationships between deformations and stresses and their derivatives.

    • What is meant with Sound Deadening/Damping?

      Sound Deadening/Damping means reduction of soundvibrations. Some coatings can reduce vibrations in the substrate when applied, dependant on the source of vibration and the substrate significant reductions are reached. Products exhibiting those properties are interesting for cars, airplanes, buses etc.

    • What is meant with the affix Solvent Based?

      The affix solvent based is used to describe products which utilize chemical liquids or gases as a solvent. See also the faq about solvents for a more detailed description of what solvent means.

    • What is meant with the Green Time?

      Green time is the time needed for a bonding to reach a certain bonding strength, known as the green strength. When the green time has passed the established bonding can be loaded with the green strength.

    • What is meant with the term Green Strength?

      Green Strength is the strength which enables the material, while not completely cured, to withstand external forces. Henc, an important value for the replacement of car windows.

    • What is meant with Visco-Elasticity?

      Visco-Elasticity is a property of materials that exhibit both viscous and elastic characteristics when undergoing deformation.

    • What is Methyl-Methacrylate?

      Methyl Methacrylate, commonly abbreviated as MMA, is an organic compound used as monomer for, poly-MMA (PMMA). But MMA is also used in Dekalin coatings to give plastic properties to the coating after curing.

    • What is Polystyrene?

      Polystyrene, sometimes abbreviated PS, is an aromatic polymer made from the aromatic monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum by the chemical industry. Polystyrene is one of the most widely used kinds of plastic throughout a variety of industries.

    • What is PVC?

      PVC is the abbreviation of Poly Vinyl Chloride, a thermoplastic polymer widely applied in a wide industrial range. PVC is polymerized from the monomer vinylchloride.

    • What is Shear Rate?

      Shear rate is the rate of velocity at which adjacent layers of fluid move with respect to each other, usually expressed as reciprocal seconds.

    • What is Shear Stress?

      Shear stress is the component of stress that causes parallel layers of a material to move relative to each other in their own planes, which is applied in the tangential direction. Shear stress can be induced into the material in many different ways.

    • What is the Final Strength?

      Final strength is the strength that an adhesive, coating or sealant reaches when cured to the utmost.

    • What is the Glass Transition Temperature, Tg?

      The glass transition temperature is the temperature at which an amorphous solid, such as glass or a polymer, becomes brittle on cooling, or soft on heating. A polymer behaves like a viscoelastic material above this temperature and as an amorphous solid below. This temperature is properties which indicates a certain maximum usability temperature.

    • What is the Open Time?

      Open time is the time after an adhesive has been applied and permitted to cure, before it becomes unworkable or loses its ability to create a bond. Also called working time. Open time varies depending on temperature, glue type, and humidity.

    • What is the process of Vulcanisation?

      See curing.

    • What is Viscosity?

      Viscosity can be described as the resistance of a liquid to shear forces (and hence to flow). The higher the viscosity the more the fluidum resist to flow. For industrial utilization of adhesives, sealants and coatings flow properties are always important.

    • What is White Spirit?

      White Spirits are clear, colourless liquid organic solvents, distilled from petroleum. they are solvents which contain a range of petroleum fractions resulting in a boilingtraject. White spirit can retain aromatics, which are expressed in volume percentage. White spirits are mainly used as thinner for paints, cleaning paint brushes and removing grease, tar adhesives and black shoe marks.

    • What means Age Resistant?

      Age Resistant means that the products is resistant against ageing when cured.

  • Others

    • Dekalin is business to business company, what is meant with it?

      Dekalin is a business to business company which means Dekalin does production for and trading with other companies. Small customers are sent further to our retail channels.

    • Dekalin is ISO 14001 compliant, what does it mean?

      Dekalin is ISO 14001 compliant, which means that Dekalin produces enviromentally friendly.

       

      ISO stands for International Organization for Standardization (ISO) and ISO14001 is the certificate for Environmental Management. All compounds, process-streams and effluents are defined and controlled by standard operating procedures written down in the ISO14001 Standard.

    • Dekalin is ISO 9001 compliant, what does it mean?

      Dekalin is ISO 9001 compliant, which means that Dekalin produces conform standard operating procedures which are examined by an extensive quality managament system. This enables Dekalin to produce products with a proven and continuous quality.

      ISO stands for International Organization for Standardization (ISO) and ISO9001 is the certificate for Quality Management. All compounds, process-streams and effluents are defined and controlled by standard operating procedures written down in the ISO9001 Standard.

    • What does BUB mean?

      Best used before or its acronym BUB is commonly followed by a date. This means that the product inside is best used before that date. It also gives information on shelf-life and storage life.

    • What does the acronym OEM stands for and what does it imply?

      OEM is the acronym for Original Equipment Manufacturer, these companies produce parts for manufactures which use the product in their own brand-product as if they produced it their selves.

    • What is a Bending Test?

      In a bending test a layer of product is applied on a metal plate. When the product has cured the test-piece is bended conform a DIN-Normation to see if, when and how cracks form in the applied productlayer. See picture below and DIN 53152.

    • What is a Gravel Test?

      A Gravel Test is carried out in order to simulate the rate of stone-chip protection a certain Dekalin coating gives to a substrate. The gravel test is carried out conform an International Standard, see SAE-J400 Method.

    • What is a Salt Spray test?

    • What is meant with Best Used Before?

      Best used before or its acronym BUB is commonly followed by a date. This means that the product inside is best used before that date. It also give information on shelf-life and storage life.

    • What is meant with Pretreatment(s) and why are they carried out?

      Pretreatment are processes carried out to reduce, eliminate, or alter the nature of a substrate before an adhesives, coating or sealant is layered on top. In the adhesion, coating or sealant business there are more pretreatment-methods available, dependant on costs, substrate or application a selection is made. In all cases the pretreatment-process enhances the final quality of adhesion/binding of the product to the substrate.

    • What is meant with Shelf Life?

      Shelf life is the time an adhesive, sealant or coating can be stored under certain conditions without becoming unsuitable for usage or selling. See also Storage Life and Best Used Before.

    • What is meant with Storage Life?

    • What is meant with the abbreviation 'VOC' ?

      'VOC' means Volatile Organic Component. THis abreviation is used on different packaging materials to show the amount of Volatile Organic Components in a certain products. The European Union has strict regulations which set the limits for a broad range of organic compounds used in end-user products.

    • What is the SAE-J400 method?

      The SAE-J400 Method is a normalized test to determine the stone chip resistance, see also Gravel test.

    • Where does the DIN 50021 Standard stands for?

      The DIN50021 Standard is an International acknowledged standard for a salt spray test. It describes the frame-boundaries of the salt-spray-test-method to determine the resistance to oxidation. Test pieces with a normalized product layer are exposed to 99% humidity with high salt concentrations. See also Salt Spray test.

    • Where does the DIN 53152 Standard stands for?

      The DIN53152 Standard is an international standard, which describes the performance for a bending test, which is a quality-measure for some Dekalin Produkts. It can easily be said to be a normalized temperature depending bending test. See also Bending Test.

  • Products

    • What are Butylstrips?

      Butylstrips are made out of kneadable butylkit in tape form. These sealing strips are used to foil and seal  irregular openings or cracks. Available in different geometries and dimensions, like circular, rectengular etc.

    • What are Contact Adhesives?

      Contact Adhesives are a group of adhesives which have to be applied to both surfaces which are to be adhered. First the surfaces dry for some time before pushed together. Once pushed together, the bonding is established. Natural rubber and polychloroprene (Neoprene) are commonly used in contact adhesives.

    • What are Drying Adhesives?

      Drying Adhesives are made out of a blend of ingredients, typically polymers, dissolved in a, mostly oragnic, solvent. As the solvent evaporates, the adhesive consolidates. Depending on the chemical composition of the adhesive, they will adhere to different materials to greater or lesser degrees. Some Dekalin Products are drying adhesives.

    • What are Hot Melt Adhesives?

      Hot melt adhesives are thermoplastic adhesives. Applied hot, above their glass transition temperature (Tg) and cure when they cool down. Some hot melts are reversible.

    • What are MS Polymers?

      MS Polymers is a general term used to describe the group Silyl Modified Polymers. This group of polymers has silyl terminated polyether groups which cure together with water. The curing proces of a MS Polymer is also called the hydrolysis of the silyl-group to form covalent bonds. MS Polymers are available in different compositions which determine the final properties of the cured MS Polymer. Varying substituents, which form the polymer backbone, determine the final properties.

    • What are Natural Adhesives?

      Natural adhesives are adhesives made out of natural components, like proteins or animal waste (e.g. bones). These natural adhesives have a history that goed back to the early Chinese, Egyptian, Roman and Greek cultures.

    • What are Synthetic Adhesives?

      Synthetic adhesives are adhesives made out of synthetic/chemical substances. Elastomers, thermoplastic, and thermosetting adhesives are examples of synthetic adhesives. Nowadays all complex adhesives are synthesized. Some are still on a natural basis and thus called natural adhesives.

    • What is a Poly Urethane?

      Poly Urethane is commonly abbreviated as PU. PU is any polymer consisting of a chain of organic units joined by urethane links. Polyurethane polymers are formed by reacting a monomer containing at least two isocyanate functional groups with another monomer containing at least two alcohol groups in the presence of a catalyst. Different building blocks influence the final physical and chemical properties of the synthesized Poly Urethane.

    • What is a Primer?

      A Primer is a layer which is applied to a surface to improve adhesion of a topcoat and/or improve corrosion resistance.

    • What is a Sealant?

      A sealant is a viscous material that changes state to become solid, once applied, it is a compressible plastic material sealing any opening or junction of two parts, to prevent the penetration of air, gas, noise, dust, fire, smoke or liquid. Commonly made of silicone, butyl tape, or polysulfide. When cured it has flexible adhesive properties

    • What is a Seam Sealer?

      A Seam Sealer is a putty-like product used to seal seams or gaps in a body. Available in solvent-based formulations, as well as water based.

    • What is an Adhesive?

      In general can be stated that adhesives are compounds in a liquid or semi-liquid state that adhere or bond items of equal or different nature together. Adhesives are either natural or synthetic based, which depends on the nature of the components.

    • What is an Insulating Adhesive?

      Insulating adhesives are adhesives that exhibit insulating properties after curing. These are used in placed where heat losses have to be minimalized, though they are adhered together.

    • What is Glue?

      Glue is a synonym for adhesive. Explanation is given with adhesive.

    • What is meant with a Coating?

      A coating is a layer on a surface in order to protect the substrate against corrosion. Generally, the coating separates the substrate from the corrosive medium.

    • What is Silicone?

      Silicones are a class of inert, semi-inorganic polymeric compounds of silicon, having a wide range of thermal stability and extreme water repellence, typically heat-resistant, nonstick, and rubberlike. Used in a very wide range of industrial applications, used in cookware, medical applications, sealants, adhesives, lubricants, and insulation.